production video
Technical Advantages
- It has an arc voltage signal interface connected with CNC system, and a signal interface for successful arc starting.
- Low-frequency arc starting, small arc remains indestructible, which greatly reduces the interference to CNC system.
- Soft-switching IGBT full-bridge inverter technology, double closed-loop current control (UC3846).
- Passive power factor correction technology, high power factor,input voltage range is 320v-450v.
- Constant current output, overcoming the voltage drop and unstable, partial arc phenomenon caused by different plasma arc length.
- High inductance reactance, high arc voltage design, concentrated energy, narrow slit.
- Continuously adjustable from minimum cutting 20A to maximum cutting current.
- Adopt non-contact high-frequency arc starting method, with added arc function, excellent instant arc starting.
- Built-in protection circuits for overheating, over-current, and air under-pressure to extend the service life of nozzle.
- With 2T/4T selection function, convenient for long welding operation, full digital current display.
- Above 160A are equipped with water cooling cutting torch, which greatly extend the life of accessories.
Technical Parameter
| Model | CUT-100 | CUT-120 |
|---|---|---|
| Voltage range (V) | 3~380V±15% | |
| Frequency(HZ) | 50/60HZ | |
| Rated input power (KVA) | 14.5 | 18.2 |
| Rated input current (A) | 22 | 28 |
| No-load voltage (V) | 370 | |
| Current adjustment range (A) | 30-100 | 30-120 |
| Max.cutting thickness (mm) | 40 | 45 |
| Max. perforation thickness (mm) | 16 | 18 |
| Arc lgnition Method | Non-contact ignition | |
| Cutting pressure (Mpa) | 0.3-0.5 | |
| Rated duty cycle(%) | 100 | |
| Recommend air compressor displacement(m3) | 0.36 | |
| Weight (Kg) | 30 | 33 |
| External dimensions (mm) | 540*310*560 | |
| Remark: 3~220V/415V/440V can be customized | ||
